Tag Archives: reduction gear

China 24V Turbo Reduction Gearbox Gear Motor Worm Gear Motor Speed Gearbox Reducer worm gearbox angle

Error:获取返回内容失败,
Your session has expired. Please reauthenticate.

worm reducer

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China 24V Turbo Reduction Gearbox Gear Motor Worm Gear Motor Speed Gearbox Reducer     worm gearbox angleChina 24V Turbo Reduction Gearbox Gear Motor Worm Gear Motor Speed Gearbox Reducer     worm gearbox angle
editor by Cx 2023-07-03

China 1400rpm Cast Nmrv 063 Reduction Ratio Gearbox Worm Gear Reducer Efficiency manufacturer

Applicable Industries: Constructing Materials Retailers, Production Plant, Equipment Mend Shops, Printing Retailers, Building functions
Excess weight (KG): 8 KG
Gearing Arrangement: Worm
Output Torque: 1.8-2430N.M
Input Speed: 14-186.7RPM
Output Speed: 1400RPM
Production method of equipment: Solid gear
Toothed Portion Condition: Involute spur equipment
Color: silver, blue, black and so on
key word: reduction gearbox
Packaging Details: internal pack: use plastic bag and foam box,reduction gearbox. outer pack: carton or picket scenario per set or dependent on customer’s request.

Feature1.Housing:Aluminium Alloy2. minimal sound(<50DB)3.Product:NMRV twenty five-one hundred fifty,Ratio:10 to 604.Effective and safe operating5.ISO9001,Manufacturing facility price,OEM6.Technological innovation Info:

Type:reduction gearbox
Model:YNMRV25-one hundred thirty
Ratio:1:ten,fifteen,twenty,twenty five,thirty,40, Disc Coupling Adaptable Coupling Diaphragm Coupling 50,sixty
Color:Blue/Silver Or On Customer Request
Material:Housing: Die-Solid Aluminum Alloy
Worm Gear-Copper-10-3#
Worm-20CrMn Ti with carburizing and quenching, surface area harness is fifty six-62HRC
Shaft-chromium metal-forty five#
Packing:Carton and Wood Scenario
Bearing:C&U Bearing
Seal:NAK OTHER
Warranty:1 Calendar year
Input Power:0.06KW,.09KW
Usages:Industrial Device: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
IEC Flange:56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON
Lubricant:Synthetic&Mineral
Contact us for > Side Bow chains Roller Chain driving chains for sprockets >> Product Group Item Big difference About Us Exhibition Certificate Packing&Shipping and delivery FAQ 1.Q:What data must i explain to you to validate the worm gearbox?A:Design/Dimension,B:Ratio and output torque, C:Powe and flange variety,D:Shaft Path,E:Housing shade,F:Get amount.2.What kind of payment approaches do you take?A:T/T,B:B/L,C:Money 3.What is your guarantee?A single calendar year. 4.How to delivery?A:By sea- Purchaser appoints forwarder,or our product sales group finds suited forwarder for purchasers.By air- Consumer gives acquire express account,or our income team fingds suited specific for consumers.(Largely for sample) Other- We prepare to shipping and delivery items to some location in China appointed by purchasers. 5.Can you make OEM/ODM buy?Sure,we have rich expertise on OEM/ODM order and like CZPT Non-disclosure Agreement ahead of sample producing Back again to House

worm reducer

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China 1400rpm Cast Nmrv 063 Reduction Ratio Gearbox Worm Gear Reducer Efficiency     manufacturer China 1400rpm Cast Nmrv 063 Reduction Ratio Gearbox Worm Gear Reducer Efficiency     manufacturer
editor by Cx 2023-06-19

China Hot selling G3 Inline Shaft Mounted Speed Reduction Gear Reducer Motor Gearbox with Hot selling

Product Description

 

Product Description

MAIN FEATURES:
1) Made of high quality material,  non-rusting;Both flange and foot mounting available and suitable for all-round installation
2) Large output torque and high radiating efficiency
3)Precise grinding helical gear with Smooth running and low noise, no deformation,can work long time in dreadful condition
4)Nice appearance, durable service life and small volume, compact structure
5)Both 2 and 3 stage available with wide ratio range from 5 to 200
6)Different output shaft diameter available -40-50mm
7)Modular construction enlarge ratio from 5 to 1400

MAIN MATERIALS:
1)housing with aluminium alloyand cast iron material;
2)Output Shaft Material:20CrMnTi
3)Good quality no noise bearings to keep long service life
4)High performance oil seal to prevent from oil leakage

APPLICATIONS:
G3 Series helical gear motor are wide used for all kinds of automatic equipment, such as chip removal machine, conveyor, packaging equipment, woodworking machinery, farming equipment, slurry scraper ,dryer, mixer and so on.

Detailed Photos

Product Parameters

 

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4571 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1571 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4571 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

Outline and mounting dimension:

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5–30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 -160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5- 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 -80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5- 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 -80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5- 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 -80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5- 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 -80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5- 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 -80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5


 

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5–30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 -160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5- 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 -80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5- 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 -80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5- 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 -80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5- 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 -80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5- 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 -80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25


 

G3FS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 5–30-40-50 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 -160-200 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
0.18kw  Ø18 5- 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 -80-100 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
 Ø28 186.5 95 115 186 11 23.5 4.5 215 140 4 15 45 170 50 28 11 31 12.8 8 4 198.5 105.5 93.5
0.37kw  Ø22 5- 181.5 110 130 164 11 19 4.5 185 160 4 12 40 148 47 22 14 24.5 16.3 6 5 201 89.5 99
 Ø28 -80-100 198 110 130 186 11 23.5 4.5 215 160 4 15 45 170 50 28 14 31 16.3 8 5 198.5 105.5 103.5
 Ø32 216.5 110 130 215 13 28.5 4.5 250 160 4 15 55 180 60 32 14 35 16.3 10 5 234 126 108.5
0.75kw  Ø28 5- 206.5 130 165 185 11 23.5 4.5 215 200 4 15 45 170 50 28 19 31 21.8 8 6 216.5 105.5 123.5
 Ø32 -80-100 235 130 165 215 13 28.5 4.5 250 200 4 15 55 180 60 32 19 35 21.8 10 6 236.5 126 128.5
 Ø40 260.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 19 43 21.8 12 8 284 149 134
1.5kw  Ø32 5- 252 130 165 215 13 28.5 4.5 250 200 5 15 55 180 60 32 24 35 27.3 10 8 236.5 126 128.5
 Ø40 -80-100 293.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 24 43 27.3 12 8 284 149 134
 Ø50 321.5 130 165 300 22 40 4.5 360 200 5 25 75 270 83 50 24 53.5 27.3 14 8 323.5 173.5 140
2.2kw  Ø40 5- 290 180 215 270 18 34 5.5 310 250 5 18 65 230 71 40 28 43 31.3 12 8 284 149 134
 Ø50 -80-100 334 180 215 300 22 40 5.5 360 250 5 25 75 270 83 50 28 53.5 31.3 14 8 323.5 173.5 140


 

G3LS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)  
Power kw output shaft ratio A B C D E F G H J K L N P S S1 T T1 W W1 X Y Y1 Z
0.12kw  Ø18 5–30-40-50 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 -160-200 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
0.18kw  Ø18 5- 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 -80-100 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
 Ø28 186.5 95 115 90 140 175 125 11 23.5 65 4.5 140 45 28 11 31 12.8 8 4 170 110 15 M8
0.37kw  Ø22 5- 181.5 110 130 65 130 154 90 11 19 55 4.5 160 40 22 14 24.5 16.3 6 5 151 90 12 M8
 Ø28 -80-100 198 110 130 90 140 175 125 11 23.5 65 4.5 160 45 28 14 31 16.3 8 5 170 110 15 M8
 Ø32 216.5 110 130 130 170 208 170 13 28.5 70 4.5 160 55 32 14 35 16.3 10 5 198 130 18 M8
0.75kw  Ø28 5- 206.5 130 165 90 140 175 125 11 23.5 65 4.5 200 45 28 19 31 21.8 8 6 186.5 110 15 M10
 Ø32 -80-100 235 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 19 35 21.8 10 6 201.5 130 18 M10
 Ø40 260.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 19 43 21.8 12 8 230 150 20 M10
1.5kw  Ø32 5- 252 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 24 35 27.3 10 8 201.5 130 18 M10
 Ø40 -80-100 293.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 24 43 27.3 12 8 230 150 20 M10
 Ø50 321.5 130 165 160 230 290 210 18 40 100 4.5 200 75 50 24 53.5 27.3 14 8 265 170 25 M10
2.2kw  Ø40 5- 290 180 215 150 210 254 196 15 34 90 5.5 250 65 40 28 43 31.3 12 8 230 150 20 M12
 Ø50 -80-100 334 180 215 160 230 290 210 18 40 100 5.5 250 75 50 28 53.5 31.3 14 8 265 170 25 M12

Company Profile

We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is  full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of high quality, and create a good reputation for reducers.

Workshop:

 

Exhibition

ZheJiang PTC Fair:

Packaging & Shipping

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other ServiceIncluding modeling selection guide, installation guide, and problem resolution guide, etc

FAQ

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:4000-5000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Step: Two Stage- Three Stage
Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

worm reducer

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducerBrass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Hot selling G3 Inline Shaft Mounted Speed Reduction Gear Reducer Motor Gearbox   with Hot selling		China Hot selling G3 Inline Shaft Mounted Speed Reduction Gear Reducer Motor Gearbox   with Hot selling
editor by CX 2023-06-07

China 110ZYT brush motor NMRV50 worm gear box NMRV reduction gear motor with high quality

Error:获取session失败,

worm reducer

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China 110ZYT brush motor NMRV50 worm gear box NMRV reduction gear motor     with high quality China 110ZYT brush motor NMRV50 worm gear box NMRV reduction gear motor     with high quality
editor by Cx 2023-04-27