Tag Archives: gear reduction motor

China 24V Turbo Reduction Gearbox Gear Motor Worm Gear Motor Speed Gearbox Reducer worm gearbox angle

Error:获取返回内容失败，
Your session has expired. Please reauthenticate.

worm reducer

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China 24V Turbo Reduction Gearbox Gear Motor Worm Gear Motor Speed Gearbox Reducer worm gearbox angle
editor by Cx 2023-07-03

China Hot selling G3 Inline Shaft Mounted Speed Reduction Gear Reducer Motor Gearbox with Hot selling

Leave a reply

Product Description

MAIN FEATURES:
1) Made of high quality material, non-rusting;Both flange and foot mounting available and suitable for all-round installation
2) Large output torque and high radiating efficiency
3)Precise grinding helical gear with Smooth running and low noise, no deformation,can work long time in dreadful condition
4)Nice appearance, durable service life and small volume, compact structure
5)Both 2 and 3 stage available with wide ratio range from 5 to 200
6)Different output shaft diameter available -40-50mm
7)Modular construction enlarge ratio from 5 to 1400

MAIN MATERIALS:
1)housing with aluminium alloyand cast iron material;
2)Output Shaft Material:20CrMnTi
3)Good quality no noise bearings to keep long service life
4)High performance oil seal to prevent from oil leakage

APPLICATIONS:
G3 Series helical gear motor are wide used for all kinds of automatic equipment, such as chip removal machine, conveyor, packaging equipment, woodworking machinery, farming equipment, slurry scraper ,dryer, mixer and so on.

Detailed Photos

Product Parameters

(n1=1400r/min 50hz)
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	92	70	56	46	35	28	23	18	14	–	11	9	7
	M2(Nm)	50hz	3.2	6.5	9.8	12.9	16.1	19.6	25.7	31.1	37.5	49.5	62.9	–	76.1	100.7	125.4
	M2(Nm)	60hz	3	5	8	11	13	17	21	26	31	41	52	–	63	84	105
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	92	70	56	45	35	29	23	18	14	13	12	8	7
	M2(Nm)	50hz	6.5	12.6	19.1	26.3	32.6	38.9	50.4	63	75.6	100.8	103.9	125.4	150	200.4	250.7
	M2(Nm)	60hz	5.4	10.5	16.6	21.9	27.1	32.4	42	52.5	63	84	86.6	104.5	125	167	208.9
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	144	92	72	58	47	36	29	24	18	14	14	12	9	7
	M2(Nm)	50hz	12.9	25	38.6	51.4	65.4	78.2	100.7	125.4	150	200.4	206.8	250.7	301.1	400.7	461.8
	M2(Nm)	60hz	10.7	20.8	32.1	42.9	54.5	65.2	83.9	104.5	125	167	172.3	208.9	250.9	333.9	384.8
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	140	94	69	58	46	35	29	24	18	14	14	11	9	7
	M2(Nm)	50hz	24.6	48.2	72.9	97.5	122.1	145.7	187.5	235.7	282.9	376.1	387.9	439	527	703	764
	M2(Nm)	60hz	20.5	40.2	60.7	81.3	201.8	121.4	156.3	196.4	235.7	313.4	323.2	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4571	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
1.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	140	93	70	55	47	34	27	24	17	14	13	12	8	7
	M2(Nm)	50hz	48.2	97.5	145.7	193.9	242.1	272	351	439	527	703	724	878	1060	1230	1230
	M2(Nm)	60hz	40.2	81.3	121.4	161.6	201.8	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			5	10	15	20	25	30	40	50	60	80	100
2.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	95	68	54	45	36	28	24	18	14
	M2(Nm)	50hz	67	133	200	266	332	399	515	644	773	1571	1230
	M2(Nm)	60hz	56	111	167	221	277	332	429	537	644	858	1080
	Fr1(N)		2160	3140	3530	4571	4700	6960	7250	8620	9800	9800	9800
	Fr2(N)		392

Outline and mounting dimension:

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE (n1=1400r/min)
Power kw	output shaft	ratio	A		F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
0.1kw	Ø18	5–30-40-50	236	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	157	80	81
0.1kw	Ø22	-160-200	262	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
0.2kw	Ø18	5-	267	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	161	80	81
	Ø22	-80-100	293	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
	Ø28		306	309.5	208.5	11	23.5	215	4	15	45	170	50	28	31	129	8	198.5	105.5	88
0.4kw	Ø22	5-	314	324.5	204	11	19	185	4	12	40	148	47	22	24.5	139	6	171.5	89.5	88.5
	Ø28	-80-100	330	337.5	215	11	23.5	215	4	15	45	170	50	28	31	139	8	198.5	105.5	93
	Ø32		349	357	229.5	13	28.5	250	4	15	55	180	60	32	35	139	10	234	126	98
0.75kw	Ø28	5-	350.5	343.5	227.5	11	23.5	215	4	15	45	170	50	28	31	159	8	198.5	105.5	103
	Ø32	-80-100	379.5	387	242	13	28.5	250	4	15	55	180	60	32	35	159	10	234	126	108
	Ø40		401.5	408.5	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
1.5kw	Ø32	5-	420.5	441	254	13	28.5	250	5	15	55	180	60	32	35	185	10	234	126	121
	Ø40	-80-100	457.5	478	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
	Ø50		485.5	506	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5
2.2kw	Ø40	5-	466.5	487	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
2.2kw	Ø50	-80-100	510.5	531	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5

G3LM: THREE PHASE GEAR MOTOR WITH FOOT (n1=1400r/min)
Power kw	output shaft	ratio	A		D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
0.1kw	Ø18	5–30-40-50	236	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
0.1kw	Ø22	-160-200	262	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
0.2kw	Ø18	5-	267	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
	Ø22	-80-100	293	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
	Ø28		306	309.5	90	140	175	23.5	125	11	65	45	28	31	129	203	8	170	110	15
0.4kw	Ø22	5-	314	324.5	65	130	155	19	90	11	55	40	22	24.5	139	199.5	6	141.5	90	12
	Ø28	-80-100	330	337.5	90	140	175	23.5	125	11	65	45	28	31	139	210	8	170	110	15
	Ø32		349	357	130	170	208	28.5	170	13	70	55	32	35	139	226	10	198	130	18
0.75kw	Ø28	5-	350.5	343.5	90	140	175	23.5	125	11	65	45	28	31	159	222	8	170	110	15
	Ø32	-80-100	379.5	387	130	170	208	28.5	170	13	70	55	32	35	159	238.5	10	198	130	18
	Ø40		401.5	408.5	150	210	254	34	196	15	90	65	40	43	185	249	12	230	150	20
1.5kw	Ø32	5-	420.5	441	130	170	208	28.5	170	13	70	55	32	35	185	250.5	10	198	130	18
	Ø40	-80-100	457.5	478	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
	Ø50		485.5	506	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25
2.2kw	Ø40	5-	466.5	487	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
2.2kw	Ø50	-80-100	510.5	531	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25

G3FS: IEC GEAR REDUCER WITH FOOT (n1=1400r/min)
Power kw	output shaft	ratio	A	B	C	F	I	J	L	M	N	O	O1	P	Q	R	S	S1	T	T1	W	W1	X	Y	Y1
Power kw	output shaft	ratio	A	B	C	F	I	J	L	M	N	O	O1	P	Q	R	S	S1	T	T1	W	W1	X	Y	Y1
0.12kw	Ø18	5–30-40-50	147	95	115	154	11	16.5	4.5	170	140	4	10	30	145	35	18	11	20.5	12.8	6	4	163	80	86.5
0.12kw	Ø22	-160-200	173	95	115	164	11	19	4.5	185	140	4	12	40	148	47	22	11	24.5	12.8	6	4	171.5	89.5	89
0.18kw	Ø18	5-	147	95	115	154	11	16.5	4.5	170	140	4	10	30	145	35	18	11	20.5	12.8	6	4	163	80	86.5
	Ø22	-80-100	173	95	115	164	11	19	4.5	185	140	4	12	40	148	47	22	11	24.5	12.8	6	4	171.5	89.5	89
	Ø28		186.5	95	115	186	11	23.5	4.5	215	140	4	15	45	170	50	28	11	31	12.8	8	4	198.5	105.5	93.5
0.37kw	Ø22	5-	181.5	110	130	164	11	19	4.5	185	160	4	12	40	148	47	22	14	24.5	16.3	6	5	201	89.5	99
	Ø28	-80-100	198	110	130	186	11	23.5	4.5	215	160	4	15	45	170	50	28	14	31	16.3	8	5	198.5	105.5	103.5
	Ø32		216.5	110	130	215	13	28.5	4.5	250	160	4	15	55	180	60	32	14	35	16.3	10	5	234	126	108.5
0.75kw	Ø28	5-	206.5	130	165	185	11	23.5	4.5	215	200	4	15	45	170	50	28	19	31	21.8	8	6	216.5	105.5	123.5
	Ø32	-80-100	235	130	165	215	13	28.5	4.5	250	200	4	15	55	180	60	32	19	35	21.8	10	6	236.5	126	128.5
	Ø40		260.5	130	165	270	18	34	4.5	310	200	5	18	65	230	71	40	19	43	21.8	12	8	284	149	134
1.5kw	Ø32	5-	252	130	165	215	13	28.5	4.5	250	200	5	15	55	180	60	32	24	35	27.3	10	8	236.5	126	128.5
	Ø40	-80-100	293.5	130	165	270	18	34	4.5	310	200	5	18	65	230	71	40	24	43	27.3	12	8	284	149	134
	Ø50		321.5	130	165	300	22	40	4.5	360	200	5	25	75	270	83	50	24	53.5	27.3	14	8	323.5	173.5	140
2.2kw	Ø40	5-	290	180	215	270	18	34	5.5	310	250	5	18	65	230	71	40	28	43	31.3	12	8	284	149	134
2.2kw	Ø50	-80-100	334	180	215	300	22	40	5.5	360	250	5	25	75	270	83	50	28	53.5	31.3	14	8	323.5	173.5	140

G3LS: IEC GEAR REDUCER WITH FOOT (n1=1400r/min)
Power kw	output shaft	ratio	A	B	C	D	E	F	G	H	J	K	L	N	P	S	S1	T	T1	W	W1	X	Y	Y1	Z
Power kw	output shaft	ratio	A	B	C	D	E	F	G	H	J	K	L	N	P	S	S1	T	T1	W	W1	X	Y	Y1	Z
0.12kw	Ø18	5–30-40-50	147	95	115	40	110	135	65	9	16.5	45	4.5	140	30	18	11	20.5	12.8	6	4	138.5	85	10	M8
0.12kw	Ø22	-160-200	173	95	115	65	130	154	90	11	19	55	4.5	140	40	22	11	24.5	12.8	6	4	141	90	12	M8
0.18kw	Ø18	5-	147	95	115	40	110	135	65	9	16.5	45	4.5	140	30	18	11	20.5	12.8	6	4	138.5	85	10	M8
	Ø22	-80-100	173	95	115	65	130	154	90	11	19	55	4.5	140	40	22	11	24.5	12.8	6	4	141	90	12	M8
	Ø28		186.5	95	115	90	140	175	125	11	23.5	65	4.5	140	45	28	11	31	12.8	8	4	170	110	15	M8
0.37kw	Ø22	5-	181.5	110	130	65	130	154	90	11	19	55	4.5	160	40	22	14	24.5	16.3	6	5	151	90	12	M8
	Ø28	-80-100	198	110	130	90	140	175	125	11	23.5	65	4.5	160	45	28	14	31	16.3	8	5	170	110	15	M8
	Ø32		216.5	110	130	130	170	208	170	13	28.5	70	4.5	160	55	32	14	35	16.3	10	5	198	130	18	M8
0.75kw	Ø28	5-	206.5	130	165	90	140	175	125	11	23.5	65	4.5	200	45	28	19	31	21.8	8	6	186.5	110	15	M10
	Ø32	-80-100	235	130	165	130	170	208	170	13	28.5	70	4.5	200	55	32	19	35	21.8	10	6	201.5	130	18	M10
	Ø40		260.5	130	165	150	210	254	196	15	34	90	4.5	200	65	40	19	43	21.8	12	8	230	150	20	M10
1.5kw	Ø32	5-	252	130	165	130	170	208	170	13	28.5	70	4.5	200	55	32	24	35	27.3	10	8	201.5	130	18	M10
	Ø40	-80-100	293.5	130	165	150	210	254	196	15	34	90	4.5	200	65	40	24	43	27.3	12	8	230	150	20	M10
	Ø50		321.5	130	165	160	230	290	210	18	40	100	4.5	200	75	50	24	53.5	27.3	14	8	265	170	25	M10
2.2kw	Ø40	5-	290	180	215	150	210	254	196	15	34	90	5.5	250	65	40	28	43	31.3	12	8	230	150	20	M12
2.2kw	Ø50	-80-100	334	180	215	160	230	290	210	18	40	100	5.5	250	75	50	28	53.5	31.3	14	8	265	170	25	M12

Company Profile

We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of high quality, and create a good reputation for reducers.

Workshop:

Exhibition

ZheJiang PTC Fair:

Packaging & Shipping

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc

FAQ

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:4000-5000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

Application:	Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical or Horizontal Type
Step:	Two Stage- Three Stage

Samples:	US$ 35/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

worm reducer

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducer Double throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducer Brass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Hot selling G3 Inline Shaft Mounted Speed Reduction Gear Reducer Motor Gearbox with Hot selling
editor by CX 2023-06-07

China 110ZYT brush motor NMRV50 worm gear box NMRV reduction gear motor with high quality

Leave a reply

Error:获取session失败，

worm reducer

Worm reducer gearbox

Mechanics

Sizes

Applications

Cost

Self-locking function

China 110ZYT brush motor NMRV50 worm gear box NMRV reduction gear motor with high quality
editor by Cx 2023-04-27

China Blue Worm Gear Transmission Speed Reduction Gear Box with Motor double worm gearbox

Leave a reply

Item Description

Solution Description

Major Supplies:
1)housing:aluminium alloy ADC12(dimensions 571-090) die cast iron HT200(size 110-150)
two)Worm:20Cr, ZI Involute profile carbonize&quencher heat remedy make equipment surface hardness up to 56-sixty two HRC Following precision grinding, carburization layer’s thickness among .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-1

Thorough Photographs

Mix Alternatives:
Enter:with enter shaft, With square flange,With IEC regular input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic include
Worm reducers are obtainable with diffferent mixtures: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS

Exploded Check out:

Merchandise Parameters

Outdated Model	New Model	Ratio	Center Distance	Electricity	Enter Dia.	Output Dia.	Output Torque	Fat
RV571		7.5~100	25mm	.06KW~.12KW	Φ9	Φ11	21N.m	.7kgs
RV030	RW030	seven.5~one hundred	30mm	.06KW~.25KW	Φ9(Φ11)	Φ14	45N.m	one.2kgs
RV040	RW040	seven.5~one hundred	40mm	.09KW~.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	seven.5~one hundred	50mm	.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	seven.5~a hundred	63mm	.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	six.2kgs
RV075	RW075	seven.5~a hundred	75mm	.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~one hundred	90mm	.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	seven.5~100	110mm	.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~one hundred	130mm	.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	forty eight.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		eighty four.0kgs

GMRV Define Dimension:

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	forty four	fourteen	fifty five	32	fifty six	63	65	29	fifty five	forty	fifty seven	thirty	75	forty four	six.5	21	five.5	M6*ten(n=4)	0°	5	16.three	27
040	a hundred	121.5	70	sixty	18(19)	60	forty three	seventy one	seventy eight	75	36.five	70	fifty	71.five	40	87	fifty five	six.5	26	six.5	M6*ten(n=4)	45°	6	20.8(21.8)	35
050	120	one hundred forty four	eighty	70	twenty five(24)	70	forty nine	85	92	eighty five	forty three.five	80	sixty	84	50	one hundred	64	eight.5	thirty	seven	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	a hundred	eighty five	25(28)	eighty	67	103	112	95	fifty three	ninety five	72	102	63	a hundred and ten	80	eight.five	36	8	M8*12(n=8)	45°	eight	28.3(31.3)	fifty
075	172	205	a hundred and twenty	ninety	28(35)	ninety five	72	112	a hundred and twenty	one hundred fifteen	57	112.five	86	119	75	a hundred and forty	93	eleven	forty	ten	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	one hundred forty	a hundred	35(38)	a hundred and ten	74	a hundred thirty	140	130	sixty seven	129.5	103	135	ninety	160	102	13	45	eleven	M10*sixteen(n=8)	45°	ten	38.3(forty one.3)	70
110	255	295	one hundred seventy	115	42	130	–	a hundred and forty four	155	a hundred sixty five	seventy four	160	127.five	167.5	110	200	125	fourteen	fifty	fourteen	M10*eighteen(n=8)	45°	12	forty five.3	eighty five
130	293	335	200	a hundred and twenty	45	a hundred and eighty	–	155	one hundred seventy	215	eighty one	179	146.five	187.5	130	250	a hundred and forty	sixteen	60	15	M12*20(n=8)	45°	14	forty eight.eight	a hundred
a hundred and fifty	340	400	240	a hundred forty five	50	a hundred and eighty	–	185	200	215	96	210	a hundred and seventy	230	one hundred fifty	250	one hundred eighty	18	72.5	eighteen	M12*22(n=8)	45°	14	53.8	120

Organization Profile

About CZPT Transmission:
We are a professional reducer company situated in HangZhou, ZHangZhoug province.
Our top items is full selection of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Pc models, UDL Variators and AC Motors, G3 helical gear motor.
Merchandise are widely used for apps these kinds of as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-producing, development machinery, metallurgic mine, environmental security engineering, and all types of automated lines, and assembly traces.
With fast shipping and delivery, excellent right after-revenue support, advanced creating facility, our merchandise market well both at home and overseas. We have exported our reducers to Southeast Asia, Jap Europe and Center East and so on.Our purpose is to build and innovate on basis of higher top quality, and produce a good reputation for reducers.

Packing details:Plastic Bags+Cartons+Wooden Situations , or on ask for
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Earn Eurasia

Logistics

After Sales Service

1.Servicing Time and Guarantee:Inside of 1 12 months following acquiring items.
two.Other Provider: Such as modeling assortment guidebook, set up manual, and problem resolution manual, etc.

FAQ

1.Q:Can you make as per buyer drawing?
A: Yes, we provide tailored service for consumers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
   A: thirty% deposit ahead of generation,stability T/T prior to delivery.
3.Q:Are you a trading company or maker?
   A:We are a manufacurer with advanced gear and experienced employees.
four.Q:What’s your production potential?
   A:8000-9000 PCS/Thirty day period
5.Q:Free sample is available or not?
   A:Sure, we can offer free of charge sample if customer concur to pay out for the courier value
six.Q:Do you have any certificate?
   A:Of course, we have CE certificate and SGS certification report.

Make contact with information:
Ms Lingel Pan
For any questions just come to feel totally free ton get in touch with me. Many many thanks for your kind attention to our organization!

US $12-220
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 12/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

US $12-220
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 12/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

Is a worm gear reducer gearbox right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Blue Worm Gear Transmission Speed Reduction Gear Box with Motor double worm gearbox
editor by czh 2023-01-30

China Hot selling NMRV063 RATIO 30 single output shaft worm gear reducer Electric motor reduction worm gearbox gearbox worm box

Leave a reply

Relevant Industries: Developing Material Shops, Production Plant, Equipment Repair Shops, Foods & Beverage Factory, Farms, House Use, Retail, Printing Retailers, Design works , Energy & Mining, Food & Beverage Retailers, Promoting Organization
Weight (KG): fifty KG
Gearing Arrangement: Worm
Output Torque: 4-2735N.m
Enter Pace: 1400rmp (4pole)
Output Speed: fourteen-280rpm
Solution identify: Worm Gear Pace Reducer
Structures: Worm Equipment Models
Mounting Placement: Flange Mounted
Gears Design: Helica Gear
Ratio: 7.5-one hundred
Output Kind: Solid Output Shaft
Warmth therapy: 58-62 HRC
Bearing: NSK.SKFor
Housing Substance: Aluminum Casing
Packaging Details: carton packing.
Port: ZheJiang

Goods Description NMRV Model & MarkerNMRV-063-thirty-VS-F1(FA)-AS-80B5-.75KW-B3* NMRV–Worm geared motor * NRV–Worm reduction unit * 063–Center length * 30–Reduction ratio * VS–Double enter shaft. * F1(FA)–Output flange * AS–Single out place shaft * AB–Double output shaft * PAM–Fitted for motor coupling * 80B5– Motor mounting facillity * 75KW–Electric motor electrical power * B3–Mounting Place Item Software FAQ Q1: Are you investing business or producer ?A1: We have our very own manufacturing unit. Q2: How extended is your shipping time?A2: Normally it is 7-thirty days.it is according to amount. Q3:Can we buy 1 laptop of each product for good quality tests?A3: Of course, we are happy to acknowledge demo purchase for quality screening. This autumn: What is your conditions of payment ?A4: We settle for T/T, Paypal, Western union . Q5: What is actually your warranty ?A5: 1 12 months.Q6: What is your shipment approach?A6: We ship by FEDEX. UPS, DHL, EMS or Sea.

Types of Gearboxes

There are several types of gearboxes. Some are known as helical gear reducers, while others are called planetary gearboxes. The article also discusses Continuously Variable Transmission (CVT) and helical gear reducer. If you are interested in purchasing a new gearbox, make sure to read our articles on these different types. If you are confused, consider reading our articles on planetary gearboxes and helical gear reducers.
gearbox

planetary gearbox

The planetary gearbox has several advantages. Its compact design and light weight allows it to transmit high torques while remaining quiet. The gears are connected to one another through a carrier, which is typically fixed and helps transmit torques to the output shaft. Its planetary structure arrangement also reduces backlash and provides high rigidity, which is important for quick start and stop cycles and rotational direction change. Depending on the design and performance desired, planetary gearboxes are categorized into three main types:
The type of planetary gears used in a given application determines the overall cost of the unit. Manufacturers offer a range of prices, and they can help you determine which gearbox is right for your needs. You should also ask a manufacturer for the cost of a planetary gearbox. By asking about price and specs, you can avoid wasting money and time on a planetary gearbox that does not perform up to its potential.
A planetary gearbox is probably installed in your new car’s automatic transmission. For more information, consult your owner’s manual or call the dealer’s service department. This type of gearbox is more complex than other types of gearboxes, so if you don’t know much about them, do an internet search for “planetary gearbox.”
The teeth of a planetary gearbox are formed by the stepping motion of two gears: the sun gear and the inner ring. The sun gear is the input, while the planetary gears rotate around the sun gear. Their ratio depends on the number of teeth and the space between the planets. If you have a 24 tooth sun gear, the planetary gears’ ratio will be -3/2. The sun gear is also attached to the axle.
Another advantage of a planetary gear system is that it can generate high torques. The load is shared among multiple planet gears. This makes the gears more resilient to damage. A planetary gearbox can be as high as 332,000 Nm, and can be used in vehicles and industrial applications requiring medium to high torque. A planetary gear system is a great alternative to a traditional transmission. So, how does it work?

helical gearbox

The main difference between the helical gearbox and the spur gear is the center distance between the teeth. The helical gearbox has a larger pitch circle than the spur gear and thus requires a radial module. In addition, the two types of gears can only be made with the same tooth-cutting tool as the spur gear. However, the helical gearbox is more efficient in terms of production costs.
The helical gearbox is a low-power consumption, compact type of gearbox that is used for a wide range of industrial applications. They are highly durable and withstand high loads with utmost efficiency. The helical gearbox can be manufactured in cast steel and iron for small and medium units. This type of gearbox is also commonly used for crushers, conveyors, coolers, and other applications that need low power.
The helical gear has many advantages over the spur gear. It produces less noise. It has less friction and is less likely to wear out. It is also quieter than spur gears. This is because multiple teeth are in mesh. Because the teeth are in mesh, the load is distributed over a larger area, resulting in a smoother transition between gears. The reduction in noise and vibration reduces the risk of damaging the gear.
The helical gear’s axial excitation force is obtained using a linearized equation of motion in the rotational direction. The damping coefficient of the equation is 0.07. The helical gear is made up of a steel shaft with a diameter of 20 mm and a 5 mm thick aluminum plate. The stiffness of the bearing is 6.84 x 107 N/m. The damping force of the plate is 2,040 kg/m2/s.
The worm gearbox has a better efficiency ratio than the helical one, but it is less efficient in low-ratio applications. In general, worm gearboxes are more efficient than helical gearboxes, although there are some exceptions to this rule. A helical gearbox is better for applications that require high torque. It may also be more economical in the long run. If you are considering a helical gearbox, consider the advantages it has over worm gearboxes.
gearbox

helical gear reducer

A helical gear reducer for a machine’s gearbox is an integral component of the drive system. This unit amplifies torque and controls speed and, therefore, compliments the engine by rotating slower than the engine’s input shaft. A helical gear reducer is a compact gearbox component that is used in industrial applications. A variety of sizes is available to suit various machine configurations. The following sections will discuss some of the different types available.
Designed by experts and engineers, a helical gear reducer is a surprisingly small and light gear that satisfies the needs of many machine applications. It features a large transmission torque, a low starting and running speed, and a fine classification of transmission ratios. A helical gear reducer is lightweight and easily connected to other gears, and it features a high technical content.
In order to avoid errors and poor performance, regular maintenance is a must. The proper lubrication of the gear reducer can minimize failures, errors, and poor performance. Every gear reducer manufacturer sells a suitable lubricant, which must match the properties of the machine’s drive mechanism. It is also advisable to check the lubrication regularly to avoid any deterioration of the unit’s performance.
While the worm gearbox may be better for applications where torque is high, the helical gear reducer offers greater efficiency at lower cost. Although worm gearboxes may be cheaper initially, they are less effective at higher ratios. Even if the worm gear is more expensive to buy, it still offers 94% efficiency, which makes it more cost-effective. There are some significant advantages to both types of gearboxes.
The main advantage of a helical gear reducer over a spur gear is its smoother operation. Unlike spur gears, which have teeth that are straight, helical gears have angled teeth that gradually engage with each other. This helps ensure that the gear does not grind or make excessive noise when it turns. Additionally, they are less commonly used in automation and precision machinery. They are often used in industrial applications.
gearbox

Continuously variable transmission

A Continuously Variable Transmission (CVT) is an automatic transmission that can run through a vast number of gears. Unlike a standard automatic transmission, it can run at any speed, even at a low rev. The CVT is also capable of running at infinitely low gears. Its basic function is to provide different torque ratios to the engine. In addition to delivering power, CVTs have other benefits.
One of the major advantages of a CVT is its simplicity. Its simplicity translates into fewer moving parts, which means less maintenance. The CVT’s simplicity also means that it can handle a wide variety of different types of road conditions and driving styles. In addition to being a great alternative to a traditional automatic transmission, CVTs can be used on many other types of vehicles, including tractors, snowmobiles, motor scooters, and power tools.
A CVT is much smoother than a conventional automatic transmission. It never has to hunt for a gear. It also responds well to throttle inputs and speed changes. Both of these technologies are available on many modern vehicles, including the Nissan Rogue and Mazda CX-5. It’s important to note that each of these transmissions has its pros and cons. So, if you’re looking for a car with a CVT, make sure to read the reviews. They’ll help you decide which transmission is right for you.
Another advantage of a CVT is its fuel efficiency. Many cars now feature CVTs, and they’re becoming increasingly popular with automakers. In addition to fuel efficiency, most cars with CVTs also have a smoother ride. There’s no more sudden downshifts or gear hunting. This makes driving a lot easier. And, the added benefits of smoother driving make CVTs the ideal choice for many drivers.
Although a CVT is more common among Japanese car manufacturers, you’ll find CVTs on European car models as well. The Mercedes-Benz A-Class, B-Class, and Megane are some examples of vehicles that use this technology. Before making a decision, consider the reliability of the model in question. Consumer Reports is a good resource for this. It also offers a history of use and reliability for every type of car, including the Honda Accord.

China Hot selling NMRV063 RATIO 30 single output shaft worm gear reducer Electric motor reduction worm gearbox gearbox worm box
editor by czh

China Professional High Precision Low Backlash Noise Helical Planetary Speed Gear Reduction Reducer Gearbox for 750W Rated Power Servo Motor with high quality

Leave a reply

Warranty: 1year
Applicable Industries: CNC, Printing machine, Food packaging, manipulator, Packaging machinery, Laser Cutting Machine, Automation
Weight (KG): 5 KG
Customized support: OEM
Gearing Arrangement: Planetary
Output Torque: 1.8-2430N.M
Input Speed: 3000rpm
Output Speed: 1000-3000rpm
Noise level: ≤65 dB
Gear Ratio: 3,4,5, High Power Planetary Helical Bevel Gear Speed Reducer 7,10
Efficiency: 94%~98%
Service life: 20000 H
Backlash: ≤7-10 arcmin
Model Number: DAB960

Specification

item	value
Warranty	1year
Applicable Industries	CNC, Printing machine, Food packaging, manipulator, Packaging machinery, Laser Cutting Machine, Automation
Customized support	OEM
Gearing Arrangement	Planetary
Output Torque	1.8-2430N.M
Input Speed	3000rpm
Output Speed	1000-3000rpm
Place of Origin	ZheJiang , China
Brand Name	KAISIDUNER
Noise level	≤ High power precision custom harmonic reducer planetary gearbox 65 dB
Gear Ratio	3,4,5,7,10
Efficiency	94%~98%
Service life	20000 H
Backlash	≤7-10 arcmin
Model Number	DAB960

Product Dimensions POWER PRODUCER Application scenario EXHIBITION EVENTS FAQ 1.Q:What information should i tell you to confirm the planetary gearbox? A:Model/Size,B:Ratio and output torque, C:Powe and flange type,D:Shaft Direction, High Power R1SF300 12000rmp 33Kg Electric Car Conversion Kit Reducer Gearbox for 2 to 4 ton Vehicle E:Order quantity.2.What type of payment methods do you accept?A:T/T,B:B/L,C:CASH;3.What’s your warranty?One year. 4.How to delivery?A:By sea- Buyer appoints forwarder,or our sales team finds suitable forwarder for buyers.By air-Buyer offers collect express account,or our sales team fingds suitable express for buyers.(Mostly for sample) Other- We arrange to delivery goods to some place in China appointed by buyers.5.Can you make OEM/ODM order? Yes,we have rich experience on OEM/ODM order and like sign Non-disclosure Agreement before sample making;

How to Design a Forging Spur Gear

Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Gear

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

Set screw spur gears

A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Gear

Keyway spur gears

In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

Spline spur gears

When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears

Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Gear

Stainless steel spur gears

There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

China Professional High Precision Low Backlash Noise Helical Planetary Speed Gear Reduction Reducer Gearbox for 750W Rated Power Servo Motor with high quality

in Antananarivo Madagascar sales price shop near me near me shop factory supplier High Torque Low Rpm Gear Motor 12V DC Motor with Gear Reduction D76lb-1250-15 manufacturer best Cost Custom Cheap wholesaler

Leave a reply

in Antananarivo Madagascar sales price shop near me near me shop factory supplier High Torque Low Rpm Gear Motor 12V DC Motor with Gear Reduction D76lb-1250-15 manufacturer best Cost Custom Cheap wholesaler

Owing to our sincerity in supplying best provider to our clientele, comprehending of your needs and overriding feeling of responsibility towards filling ordering demands, Moreover, all our generation methods are in compliance with ISO9002 requirements. Because of to our wide merchandise selection and wealthy encounters in this business, EPT Torque Reduced Rpm EPT EPT 12V Dc EPT with EPT Reduction D76LB-1250-fifteen

Product:D76L(B)-12v50w-15rpm

Kind	dc worm EPT motor
EPT Diameter	76mm
Voltage	12v 24v 36v 42v 48v 60v
EPTT	le150W
Torque	le20N.M
Velocity	le300RPM
EPT of ratio	seventy five:1 sixty five:1 60:one 47:2 twenty:1
EPT Modulus	75:one M=.eight forty seven:two M=one.25 65:one sixty:1 twenty:one M=one
EPT of EPT	Plastic / brass
OEM/ODM Support	Take
Use	EPT pump ,electrical forklift ,vending EPTT, XiHu (West EPT) Dis.Hu (West EPT) Dis.age doorway opener,stitching EPTT,electrical equipment

HangEPT HuiEPTT EPT amp EPTT EPTT,Ltd is a subsidiary of HangEPT Wewin EPT EPTT,Ltd.The manufacturing unit is found in EPTTdu,HangEPT,we can design and manufacture of motors according to all our customers’ requires so considerably,we can manufacture about 60,000 motors per thirty day period.

Our major market:

Europe,The united states and Asia,incXiHu (West EPT) Dis.Hu (West EPT) Dis. United Kingdom,Germany,EPTT,France,Sweden, United Point out,Brazil,India,Korea and so on.

EPTT Advantages:

one. Large creation potential, quickly shipping.

2. Stringent QC inspecting principles: all goods need to be 100% inspected prior to supply.

three. OEM/ODM providers are offered

four. 24 hours online service.

five. Prompt quotation for your inquiry

6. EPTT,reliability and EPTT merchandise life.

seven. Skilled manufacturer offers competitive price tag.

8. Diversified abundant knowledgeable experienced personnel.

A lot more Programs:

Auto EPTTlator ,XiHu (West EPT) Dis.Hu (West EPT) Dis.age door opener ,gate operator, EPTT barrier,wheelchair ,electric automobile ,drinking water pump ,oil pump,sewing EPTT,welding EPTT, EPTT cooling supporter,flooring poEPTTr,EPT carry,stair elevate,medical center bed ,EPT pump electrical forklift.

RFQ:

Q: Are you buying and selling firm or maker ?

A: We are Integration of business and trade, with over twenty a long time encounter in DC worm EPT motor. Our company have amassed expert generation line, comprehensive management and EPTTful research help, which could match all of the customers’ requirements and make them gratification.

Q: What is your principal merchandise?

–DC EPT: EPT motor, Square motor, Stepped motor, and EPT motor
-EPT equipment: Wire feeder, EPT rod, EPT Torch, Earth clamp, Electrode holder, and Rectifier

Q: What if I never know which DC motor EPT?

A: Don’t fear, Send as significantly data as you can, our group will assist you locate the rigEPTT one particular you are searching for.

Q: What is your conditions of payment ?

A: Payment lt=1000USD, one hundred% in EPT. Payment gt=1000USD, thirty% T/T in EPT ,balance before shippment.
If you have one more concern, pls come to feel free to make contact with us as underneath:

Q: How to delivery:

A: By sea – Buyer appoint EPTTer, or our sales staff uncover suited forwarEPTTfor buyers.

By air – Customer offer you EPT specific account, or our revenue group find suitable express for purchasers. (Largely for sample)
Other people – Actually,samples send out by DHL,UPS, TNT and Fedex and many others. We organize to delivery merchandise to some location from EPTT appointed by consumers.

Q: How EPTT is your shipping and delivery time?
A: EPTTly it is five-10 daEPTTif the merchandise are in stock. or it is fifteen-20 daEPTTif the goods are not in stock, it is in accordance to amount.